2026 Chelan PUD commercial incentives

Commercial Heat Pump Rebates for Chelan County Businesses

Qualifying businesses may receive $2,400 per ton for an electric-resistance heating conversion or $400 per ton for an eligible heat-pump upgrade.

Request a Commercial Rebate Review

Prefer to call? (509) 436-1178

Chelan County

For eligible Chelan PUD commercial customers.

Three System Types

Ducted, ductless, and VRF may qualify.

Licensed Contractor

Required for installation and applications.

2026 Program

Valid subject to program availability.

Two incentive paths

Which Commercial Incentive Could Apply?

The existing heating system and project type determine the incentive category. Chelan PUD makes the final eligibility and payment decision.

Conversion incentive

$2,400 per ton

For qualifying conversions from electric-resistance heating.

  • Electric forced-air furnace
  • Electric baseboards or wall heaters
  • Electric resistance must be the primary heat source

Upgrade incentive

$400 per ton

For qualifying heat-pump upgrades and construction projects.

  • Existing air-source heat pump
  • Addition or major renovation
  • New commercial construction

Large or complex project? Custom incentives may be available. Bring Alpine Aire into the planning process early so the project can be reviewed before equipment decisions are final.

A major opportunity to lower project cost

Your Business Could Qualify for Thousands—Even Tens of Thousands—in Heat-Pump Incentives

For a qualifying conversion from electric-resistance heat, the estimated incentive grows with system size at $2,400 per ton. Even a modest commercial project can create a substantial opportunity to reduce the upfront investment.

Your Estimated Conversion Incentive

Example: 10 qualifying tons × $2,400 = $24,000 in estimated incentives.

3-Ton Example

$7,200

Estimated conversion incentive

5-Ton Example

$12,000

Estimated conversion incentive

10-Ton Example

$24,000

Estimated conversion incentive

20-Ton Example

$48,000

Estimated conversion incentive

A 20-ton conversion could mean an estimated $48,000 toward the project.

That is more than a small discount—it could materially change the budget for replacing electric-resistance heating with an efficient commercial heat-pump system. Your actual opportunity depends on the existing heat source, qualifying system capacity, equipment, eligible project cost, and Chelan PUD approval.

Already heating with a heat pump?

Eligible upgrade projects may qualify for $400 per ton: an estimated $2,000 for 5 tons, $4,000 for 10 tons, or $8,000 for 20 tons.

Do Not Install Before Your Project Is Reviewed

Commercial heat-pump incentives require contractor-submitted pre-authorization. Let Alpine Aire review your existing system and estimated tonnage before equipment is ordered or installation begins.

Request a Commercial Rebate Review

Examples are estimates only—not quotes, approvals, or guaranteed payments. Final eligibility and incentive amounts are determined by Chelan PUD and cannot exceed eligible project costs.

Four straightforward steps

How the Commercial Rebate Process Works

01

Review

Alpine Aire reviews the building, existing heat source, and proposed system.

02

Pre-Authorize

The contractor submits project details and existing-equipment documentation.

03

Install

After approval, qualifying equipment is installed and commissioned.

04

Apply

The contractor submits the final application and required documentation.

Before and after installation

What the Application Requires

Before Installation

  • Existing-equipment photos and nameplates
  • Chelan PUD meter number
  • Customer contact information
  • Planned equipment and system tonnage
  • AHRI certificates when the project totals 16 tons or more

After Installation

  • New-equipment photos and nameplates
  • Itemized project invoice
  • Equipment models, capacity, and efficiency
  • AHRI certificates
  • W-9 if the business receives the incentive payment

Basic eligibility: The project must serve a qualifying Chelan PUD commercial customer in Chelan County, meet the applicable existing-heating and equipment-efficiency requirements, use a licensed contractor, and submit the final application within 12 months of installation.

Technical requirements

Equipment Must Meet Chelan PUD Standards

Alpine Aire can verify proposed capacity, HSPF2 or COP ratings, matched-system AHRI documentation, electrical needs, controls, and commissioning requirements during project planning.

View the 2026 commercial efficiency thresholds

Air-Source Heat Pumps

Equipment size Rating condition Minimum efficiency
Under 65,000 BTU/h Split system 8.1 HSPF2
Under 65,000 BTU/h Single package 7.0 HSPF2
65,000 to under 135,000 BTU/h Heating at 47°F db / 43°F wb 3.5 COP
135,000 BTU/h or larger Heating at 47°F db / 43°F wb 3.4 COP

Ductless Heat Pumps

  • Non-ducted: 10.4 HSPF2
  • Ducted: 9.4 HSPF2

Variable Refrigerant Flow

  • Under 65,000 BTU/h: 11.0 HSPF
  • 65,000 to under 135,000 BTU/h: 3.7 COP
  • 135,000 BTU/h or larger: 3.5 COP

Local commercial HVAC support

Commercial Heat-Pump Installation Near Wenatchee

Alpine Aire supports eligible commercial projects across Chelan County, including Wenatchee, Cashmere, Leavenworth, Chelan, Entiat, Manson, Monitor, Malaga, Dryden, and Peshastin.

Alpine Aire is included in Chelan PUD’s local heat-pump and HVAC contractor directory.

Start With These Details

  • Commercial property address
  • Current primary heating system
  • Approximate project timing
  • Any existing HVAC proposal or equipment information

Frequently asked questions

Commercial Heat-Pump Rebate FAQ

How much is the Chelan PUD commercial heat-pump incentive?

Qualifying electric-resistance conversions may receive $2,400 per ton. Eligible heat-pump upgrades, additions, major renovations, and new commercial construction may receive $400 per ton.

Is pre-authorization required?

Yes. The HVAC contractor must submit pre-authorization before installation for commercial ducted, ductless, and VRF heat-pump projects.

How long does pre-authorization take?

Complete commercial submissions typically take about seven business days to review. A pre-authorization is valid for six months.

What does per ton mean?

One ton equals 12,000 BTU/h of HVAC capacity. A qualifying 5-ton conversion, for example, would have an estimated incentive of $12,000 before Chelan PUD verification.

Can new commercial construction qualify?

Yes. Qualifying new commercial construction may receive the $400-per-ton upgrade incentive but not the conversion incentive.

Which properties are excluded from the commercial program?

Chelan PUD excludes short-term rentals, long-term rentals, condos, townhomes, cabins, and other residential-style lodging from the commercial program. Some may qualify through a residential program instead.

Does the property have to be in Chelan County?

The program is for qualifying Chelan PUD commercial customers in Chelan County. The project address and utility account must meet program requirements.

Program source: Review the official Chelan PUD commercial heat-pump incentive page for current requirements.

Disclaimer: Incentives, eligibility, equipment standards, funding, inspections, and timelines are controlled by Chelan PUD and may change. Alpine Aire cannot guarantee approval or payment.

Start before installation

Find Out Which Commercial Incentive Fits Your Project

We’ll review your property, existing heating system, project timing, and proposed equipment before work begins.

Request a Commercial Rebate Review

Or call (509) 436-1178